No. 4 AIR SUPPLY FINS (ADJUSTABLE)
Central air intake grill. N°4 sides air supply fins manually adjustable enablingan optimal diffusion of the air in the 4 directions.
BEARING STRUCTURE (SUITABLE FOR FALSE CEILING (600 mm × 600 mm)
Bearing structure made of extremely thick galvanized steelsheet + Internalthermo-acoustic insulation (class M1). External brackets on the 4 corners for aneasy fixing to the roof. N° 01 hole
Ø 67 mm for optional external air intake bya circular duct and N°02 holes Ø 155 mm for optional ducts application fortreated air delivery in near environment. Dimensions 575 mm x 575 mm,
idealfor installation on false ceiling 600 mm x 600 mm. Height to 255 mm only.(Note: mod. FCS 1230-1430-1221-1421 with different dimensions; 600x1.200).
DRAIN PAN (POLYSTYRENE)
Drain pan made of Polystyrene, made in one piece by thermomoulding (withoutdangerous junctions). Provided with drainpipe Ø 31,5 mm.
CONDENSATE PUMP (STATIC PRESSURE = 1m)
Condensate pump including floater and not-return valve avoiding frequent on/off.Static pressure = 1m ; 230V – 1Ph – 50Hz.
HEAT EXCHANGER (WATER COIL)
Coil made of copper pipes and aluminium fins fixed by mechanical expansion.Coil connections provided with manual air vent valve.For 2-pipe units: 1 coil with 2 water connections (1
inlet + 1 outlet)For 4-pipe units: 1 coil with 4 water connections (2 inlets + 2 outlets)Coils tested at 30 Bar pressure, suitable to work with water at max 15 Bar pressure.Coils designed to work with hot water (boiler), low temperature hot water (condenseboiler, solar energy system, hot water pump, etc.), chilled water (chillers and/orindustrial processes), water added with glycol.
Working with water temperature limit 80°C.
FAN SECTION (7-SPEED CENTRIFUGAL FAN)
Fan section including 1 centrifugal fan with single air inlet. Fan made of ABS,specially designed for this application, directly coupled to the electric motor. Mounted on elastic and anti vibration supports. Fan section statically anddynamically balanced, extra silent fan, designed to realize high air flow with lowrevolutions number.Electric motor has 7 speeds, 3 speeds connected in the factory (= produc􀆞lexibility), provided with heat protection (Klixon), running capacitor permanentlyswitched on, IP 42, Class B, electric cables protected by double insulation.
(Note: mod. FCS 1230-1430-1221-1421 with no. 02 motors/fans). Manufactured according to the international standards, 230V – 1Ph – 50Hz.
AIR FILTER (HIGH EFFICIENCY)
Air filter easy to remove, made of a metal frame holding filtering section.Can be regenerated by water wash, blowing, suction. Made of high efficiencypolypropylene NAN cellular fabric net.
Superlative against Powders and Pollens.Class M1 ; Filtering level EU3 (EUROVENT 4/5).
ELECTRICAL EQUIPMENT (TERMINAL BOARD)
Terminal board for connection with remote control (The remote control is anaccessory), mounted in an bearing structure corner.
AVAILABLE ACCESSORIES:
INFRARED REMOTE CONTROL
The standard unit is supplied with a terminal board to connect the unit to wiredremote control.Tocontrol the unit through an infrared remote control, is available the accessory“Electronic
card mounted on the unit + Receiver + Infrared Remote Control”.